Preparing to Print

wPictBridge

ACP Direct

SBubble Jet Direct

6 Playback the image.

¡ Press the <x> button.

sThe image will appear and one of three icons <w, A, S> will appear on the upper left to indicate that the camera is connected to the printer.

¡The procedure will be different depending on the icon displayed. See the applicable pages below.

Icon

Direct Print Type

Reference

pages

 

 

w

PictBridge

119 - 122

 

 

 

A

CP Direct

123 - 125

 

 

 

S

Bubble Jet Direct

126 - 128

¡If you use a battery to power the camera, make sure it is fully charged. During direct printing, keep checking the battery level.

¡If there is a long beeping sound in step 5, it indicates a problem with the PictBridge printer. To find out what’s wrong, do the following:

Press the <x> button to playback the image and follow the steps below.

1.Press <0>.

2.On the print setting screen, select [Print].

The error message will be displayed on the LCD monitor. See “Error Messages” on page 122.

¡Before disconnecting the cable, turn off the camera and printer. Pull out the cable while holding the plug, not the cord.

¡When connecting the camera to the printer, do not use any cable other than the dedicated interface cable.

For direct printing, using AC Adapter Kit ACK-E2 (optional) to power the camera is recommended.

118