Using the Built-in Flash

AFE lockN

FE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject.

1 Check that the <D> icon is lit. ¡ Press the <D> button to pop-up the

built-in flash.

¡ In the viewfinder, check that the <D> icon is lit.

2Focus the subject.

¡Press the shutter button halfway. Keep pressing the shutter button halfway until step 4.

Partial metering

3 Press the <A> button.

 

s The Speedlite will fire a preflash and

 

the required flash output is retained in

 

memory. (8)

 

s In the viewfinder, “FEL” is displayed

 

and <A> will light.

 

¡ Each time you press the <A> button,

 

a preflash is fired and the required

 

flash output is retained in memory.

4Take the picture.

¡Compose the shot and press the shutter button fully.

sThe flash is fired to take the picture.

If the subject is too far away and beyond the effective range of the flash, the <D> icon will blink. Get closer to the subject and repeat steps 2 to 4.

95