|
| Recharging the Battery | |
|
|
| |
|
|
| |
|
| ¡ The numbers and markings on the | |
Recharge Level | Red lamp | ||
Blinks once per second | battery charger correspond to the | ||
|
| table on the left. | |
Blinks twice per second | |||
| |||
|
|
| |
Blinks three times |
| ||
per second |
| ||
|
| ||
|
|
| |
90% or higher | Lights on |
| |
|
|
|
¡ Do not recharge any battery pack other than Battery Pack
¡If the battery is left in the camera for a prolonged period without the camera being used, a low electrical current may be discharged excessively and the battery’s service life may be affected. When not using the camera, remove the battery and attach the protective cover to prevent shorting. Before using the camera again, be sure to recharge the battery.
¡ After the red lamp lights, continue to recharge the battery for an hour to attain a full charge.
¡ By referring to the marking, you can attach the protective cover to the battery to indicate whether the battery has been recharged or not.
¡After recharging the battery, detach it and unplug the power cord from the power outlet.
¡The time required to recharge the battery depends on the ambient temperature and battery’s recharge level.
¡The battery pack can operate in temperatures from 0°C to 40°C (32°F to 104°F). However, for full operating performance, using it between 10°C (50°F) and 30°C (86°F) is recommended. In cold locations such as ski areas, battery performance temporarily decreases and the operating time may be shorter.
¡If operating time is sharply reduced even after normal recharging, the battery pack may have reached its service life. Replace it with a new battery.
19