qSelecting the Metering ModeN
The camera has three metering modes: Evaluative, partial, and centerweighted average metering. In the Basic Zone modes, evaluative metering will be set automatically.
1 Press the <Q> button. (9)
2 Select the metering mode.
¡ While looking at the LCD panel, turn the <6> dial.
q: Evaluative Metering
w: Partial Metering
e: Centerweighted Average
Metering
qEvaluative Metering
This is the camera’s standard metering mode suited for most subjects even under backlit conditions. After detecting the main subject’s position, brightness, background, front and back lighting, etc., the camera sets the proper exposure.
¡During manual focusing, evaluative metering is based on the center AF point.
¡If the subject brightness and background light level are very different (there is a strong backlight or spotlight), use partial metering <w> instead.
wPartial Metering
Effective when the background is much brighter than the subject due to backlighting, etc. Partial metering covers about 9% of the viewfinder area at the center. The area covered by partial metering is shown on the left.
eCenterweighted Average Metering
The metering is weighted at the center and then averaged for the entire scene.
71