Using the Built-in Flash
Using Red-eye Reduction
When flash is used in a low-light environment, the subject’s eyes may look red in the image. “Red eye” happens when the light from the flash reflects off the retina of the eyes. The camera’s red-eye reduction feature turns on the red-eye reduction lamp to shine a gentle light into the subject’s eyes to narrow the pupil diameter or iris. A smaller pupil reduces the chances of red eye from occurring. Red-eye reduction can be set in any shooting mode except <3> <5> <7>.
1Select [Red-eye On/Off].
¡Turn the <5> dial to select [zRed- eye On/Off], then press <0>.
2Select [On].
¡Turn the <5> dial to select [On], then press <0>.
| ¡ When you press the shutter button down | |
| halfway, the red-eye reduction lamp | |
| indicator appears in the viewfinder. | |
| ¡ Red-eye reduction will not work unless the | |
| subject looks at the red-eye reduction lamp. Tell | |
| the subject to look at the lamp. | Red-eye |
| ¡ To increase the effectiveness of red-eye |
| reduction lamp |
| reduction, press the shutter button down fully |
| On indicator |
| after the red-eye reduction lamp (which lights for |
| |
| approximately 1.5 seconds) indicator goes off. | |
¡You can shoot anytime by pressing the shutter button down fully, even if the red-eye reduction lamp is still on.
¡The effectiveness of red-eye reduction varies from subject to subject.
¡Red-eye reduction is more effective in brighter rooms or when the camera is closer to the subject.