Menu Operations
About the LCD Monitor
¡When using the LCD monitor, you can use the <5> dial even while the <4> switch is <1>.
¡The LCD monitor cannot be used as a viewfinder for shooting.
¡You can adjust the brightness of the LCD monitor to one of five levels. (p.102)
Restoring the Camera’s Default SettingsN
1Select [Clear settings].
¡Press the <M> button.
¡Turn the <5> dial to select [cClear settings], then press <0>.
2Select [Clear all camera settings].
¡Turn the <5> dial to select [Clear all camera settings], then press<0>.
3 Select [OK]. | |
| ¡ Turn the <5> dial to select [OK], |
| then press <0>. The default settings |
| will be restored. |
| s The camera’s default settings will be |
| as shown below. |
Shooting Settings | |
AF mode | ||
AF point selection | Automatic AF point selection | |
Metering mode | Evaluative metering | |
Drive mode | Single shooting | |
Exposure | 0 (Zero) | |
compensation | ||
| ||
AEB | Off | |
Flash exposure | 0 (Zero) | |
compensation | ||
| ||
Custom Functions | Current settings retained | |
|
|
Quality | 73 | |
ISO speed | 100 | |
Color space | sRGB | |
White balance | Q | |
Color | 5200K | |
temperature | ||
| ||
WB correction | Off | |
Off | ||
Parameters | Parameter 2 | |
|
|
32