iSelecting the Drive Mode

Single and continuous drive modes are provided. In the Basic Zone modes, the optimum drive mode is set automatically.

1

2

Press the <R> button. (9)

Select the drive mode.

¡While looking at the LCD panel, turn the <6> dial.

u: Single shooting

When you press the shutter button completely, one shot will be taken.

i : Continuous shooting (Max. 5 shots per sec.)

While you press the shutter button completely, shots will be taken continuously.

j: Self-timer Operation (p.44)

¡During continuous shooting, the captured images

are first stored in the camera’s internal memory

 

 

 

and then successively transferred to the CF card.

Max. Burst

When the internal memory becomes full during

 

 

 

continuous shooting, “buSY” will be displayed on the LCD panel and in the viewfinder and the camera cannot take any more shots. As the captured images are transferred to the CF card, you will be able to capture more images. Press the shutter button halfway to check in the viewfinder’s bottom right the current remaining shots of the maximum burst.

¡If “FuLL CF” is displayed in the viewfinder and on the LCD panel, wait until the access lamp stops blinking, then replace the CF card.

¡When the battery level is low, the maximum burst will be slightly lower.

72