8Automatic Depth-of-Field AE
This mode is for obtaining a wide depth of field automatically between a near subject and far subject. It is effective for group photos and landscapes. The camera uses the nine AF points to detect the nearest and farthest subjects to be in focus.
* <8> stands for
1 2
Set the Mode Dial to <8>.
Focus the subject.
¡Move the AF point over the subject and press the shutter button halfway. (0)
¡All the subjects covered by the AF points which flashed in red will be in focus.
¡Hold down the shutter button halfway and press the
3Take the picture.
¡As long as the exposure setting is not blinking, the exposure will be correct.
¡The <8> mode cannot be used if the lens’ focus mode switch is set to <MF>. The result will be the same as using the <d> mode.
¡If the “30"” shutter speed blinks, it indicates underexposure. Increase the ISO speed.
¡If the “8000” shutter speed blinks, it indicates overexposure. Decrease the ISO speed.
¡If the aperture value blinks, it indicates that the exposure level is correct but the desired depth of field cannot be achieved. Either use a wide- angle lens or move further away from the subjects.
¡In this shooting mode, you cannot freely change the shutter speed and aperture value. If the camera sets a slow shutter speed, hold the camera steady or use a tripod.
¡If you use flash, the result will be the same as using <d> with flash.
82