SSelecting the AF AreaN

Selecting the AF Point Manually

You can manually select the AF point or zone. If 19-point automatic selection AF + AI Servo AF has been set, you can select any position where AI Servo AF is to start.

1 Press the <S> or <B> button.

(9)

X The AF points will be displayed in the viewfinder.

In the Zone AF mode, the selected zone will be displayed.

2 Select an AF point.

The AF point selection will change in the direction you tilt <9>. If you press <0>, the center AF point (or center zone) will be selected.

You can also select a horizontal AF point by turning the <6> dial and select a vertical AF point by turning the <5> dial.

In the Zone AF mode, turning the <6> or <5> dial will change the zone in a looping sequence.

When you hold down the <Q> button and turn the <6> dial, you can select a vertical AF point.

When you press the <S> or <B> button, the LCD panel displays the following:

•19-point automatic selection AF and Zone AF (manual zone selection):

AF

•1 pt AF (Manual selection): SEL (Center)/SEL AF (Off center)

With [8C.Fn II-10: Manual AF pt. selec. pattern], you can set either [Stops at AF area edges] or [Continuous] (p.373).

105