3Menu Function Settings

A2 N

Silent LV shootingN

Mode 1

The shooting operation noise is quieter than with normal shooting. Continuous shooting is also possible. If <o> is set, you can shoot at a maximum continuous shooting speed of approx. 7.0 fps.

Mode 2

When the shutter button is pressed completely, only one shot will be taken. While you keep holding down the shutter button, the camera operation will be suspended. Then when you return to the shutter button’s halfway position, the camera operation will resume. The shooting noise is thereby minimized. Even if continuous shooting is set, only a single shot will be taken.

Disable

Be sure to set it to [Disable] if you use a TS-E lens (other than

those listed in below) for shifting or tilting the lens or if you use an Extension tube. If [Mode 1] or [Mode 2] is set, the standard exposure may not be obtained or an irregular exposure may result.

If you use flash, silent shooting will not be possible regardless of the [Silent LV shoot.] setting.

When using a non-Canon flash unit, set it to [Disable]. The flash will not fire if it is set to [Mode 1] or [Mode 2].

If [Mode 2] is set and you use a Remote Controller (p.184), the operation will be the same as with [Mode 1].

With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [Mode 1] or [Mode 2].

231