qSelecting the Metering ModeN

If Auto ISO is set, the ISO speed setting will change to suit the shutter speed and aperture in order to obtain a standard exposure. Therefore, you may not obtain the desired exposure effect.

In [z3: Auto Lighting Optimizer], if the checkmark <X> for [Disabled in M or B modes] is removed, Auto Lighting Optimizer can be set in the <a> and <F> modes (p.140).

When Auto ISO is set, you can press the <A> button to lock the ISO speed.

If you press the <A> button and recompose the shot, you can see the exposure level difference on the exposure level indicator (p.22, 23) compared to when the <A> button was pressed.

qSelecting the Metering ModeN

You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically.

1 2

Press the <q> button. (9)

Select the metering mode.

While looking at the LCD panel, turn the <6> or <5> dial.

q: Evaluative metering

w: Partial metering

r: Spot metering

e: Center-weighted average metering

qEvaluative metering

This is a general-purpose metering mode suited even for backlit subjects. The camera sets the exposure automatically to suit the scene.

165