PMultiple ExposuresN
Merging Multiple Exposures with an Image Recorded on the Card
You can select an image recorded on the card as the first single exposure. The original of the selected image will remain intact.
You can only select 1images. You cannot select 41/61or
JPEG images.
1Select [Select image for multi. expo.].
Select [Select image for multi. expo.], then press <0>.
X The images on the card will be displayed.
2 Select an image.
Turn the <5> dial to select the image to be used as the first single exposure, then press <0>. Select [OK].
XThe file number of the selected image will be displayed at the bottom of the screen.
3 Take the picture.
When you select the first image, the number of remaining exposures as set with [No. of exposures] will decrease by 1. For example, if [No. of exposures] is 3, you can shoot two exposures.
Images shot with highlight tone priority set to [Enable] and images whose aspect ratio is not 3:2 (p.229) cannot be selected as the first single exposure. Auto Lighting Optimizer, peripheral illumination correction and chromatic aberration correction will be disabled, regardless of the settings of the 1image selected as the first single exposure.
The ISO speed, Picture Style, high ISO speed noise reduction, and color space, etc. set for the first 1image will also be set for the subsequent images.
If the first 1image’s Picture Style is [Auto], the [Standard] Picture Style will be set for the subsequent images.
You cannot select an image taken with another camera.
179