3Setting the White BalanceN
4 Select [White balance].
Under the [z3] tab, select [White balance], then press <0>.
5Select the custom white balance.
Select [O], then press <0>.
If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained.
In step 3, the following images cannot be selected: images captured while the Picture Style was set to [Monochrome],
Instead of a white object, a gray chart or 18% gray reflector (commercially available) can produce a more accurate white balance. The personal white balance registered with the provided software will be registered under [O]. If you execute step 3, the data for the registered personal white balance will be erased.
136