Using Wireless FlashN

Fully Automatic Shooting with One External Speedlite and the Built-in Flash

This is fully automatic wireless flash shooting with one external Speedlite and the built-in flash.

You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows look on the subject.

1Set [Wireless func.] to [0:3].

In step 5 on page 207, set [Wireless func.] to [0:3].

2Set the desired flash ratio and take the picture.

Select [1:2] and set the flash ratio within 8:1 to 1:1. Setting a flash ratio to the right of 1:1 is not possible.

If the built-in flash output is not enough, set a higher ISO speed (p.120). The 8:1 to 1:1 flash ratio is equivalent to 3:1 to 1:1 stops (1/2-stop increments).

208