Installing and Removing the Card
The number of possible shots depends on the remaining capacity of the card,
Setting [z1: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (p.408).
Removing the Card
Access lamp | 1 Open the cover. |
| |
| Set the power switch to <2>. |
| Make sure the access lamp is off, |
| then open the cover. |
| If [Recording...] is displayed, close |
| the cover. |
| 2 Remove the card. |
| To eject the card, gently push it in and |
| then let go. |
| Pull the card straight out, then close |
| the cover. |
32