kShooting Movies

AEB cannot be used.

Even if a flash is used, it will not fire.

Continuous still photo shooting is possible during movie shooting. However, the captured images will not be displayed on the screen. Depending on the still photo’s image-recording quality, number of shots during continuous shooting, card performance, etc., movie shooting may stop automatically.

When you press the <p> button to autofocus during movie shooting, the following phenomena may occur.

•Focus may become far off momentarily.

•The brightness of the recorded movie may be different from that of the actual scene.

•The recorded movie may be momentarily still.

•The movie may record the lens operation noise.

•You cannot shoot still photos when focus is not achieved, such as when the subject is moving.

Autofocus will not be performed during movie shooting even if the shutter button is pressed halfway.

If you want to shoot still photos continuously during movie shooting, using a high-speed card is recommended. Setting a smaller image- recording quality for still photos and shooting fewer continuous still photos are also recommended.

You can shoot still photos in all drive modes.

The self-timer can be set before you start shooting a movie. During movie shooting, the camera will switch to single-image shooting.

262