Troubleshooting Guide

ISO 100 cannot be set. ISO speed expansion cannot be selected.

When [z4: Highlight tone priority] is set to [Disable], ISO 100/125/ 160 can be set (p.145).

If [z4: Highlight tone priority] is set to [Enable], the settable ISO speed range will be ISO 200 - ISO 12800 (or up to ISO 6400 for movie shooting). Even if you expand the settable ISO speed range in [ISO speed range], you cannot set expanded ISO speeds (H).

The Auto Lighting Optimizer cannot be set.

If [z4: Highlight tone priority] is set to [Enable], the Auto Lighting

Optimizer cannot be set. When [z4: Highlight tone priority] is set to [Disable], then the Auto Lighting Optimizer can be set (p.145).

Even though I set a decreased exposure compensation, the image comes out bright.

Set [z3: Auto Lighting Optimizer] to [Disable]. When [Low/ Standard/High] is set, even if you set a decreased exposure compensation or flash exposure compensation, the image may come out bright (p.140).

The multiple-exposure image is shot in 1quality.

When the image-recording quality is set to 41or 61, the multiple-exposure image will be recorded in 1quality (p.181).

When I use the <f> mode with flash, the shutter speed becomes slow.

If you shoot at night when the background is dark, the shutter speed becomes slow automatically (slow-sync shooting) so that both the subject and background are properly exposed. To prevent a slow shutter speed, under [z2: Flash control], set [Flash sync. speed in Av mode] to [1/250-1/60sec. auto] or [1/250 sec. (fixed)] (p.196).

422