H323 IP Telephone Installation Page 57

15-601046 Issue 16a (15 March 2010)IP Office Release 6

Static Administration Options: View Details

4.4 Self-Test Procedure
1.To start the IP phone self-test procedures, press the following sequence: MUTE 8 3 7 8 # (MUTE T E S T #). The
phone does the following:
·Each column of programmable button LED's is lit for half a second from left to right across the phone, in a
repeating cycle. The Speaker/Mute LED and the message waiting LED are also lit in sequence.
·Buttons (other than #) generate a click if pressed.
·Phones with displays show Self test #=end for 1 second after self-test is started. Then a block character (all
pixels on) is displayed in all display character locations for 5 seconds. Display of the block character is used to
find bad display pixels.
2.One of the following is finally displayed:
·If self-test passes:
Self test passed
#=end
·If self-test fails:
Self test failed
#=end
3.To end the self-test, press #. The phone returns to normal operation.