Canon H323 manual Manually Creating Extensions

Installation: Creating/Editing the Settings File

2.3 Manually Creating Extensions

If installing without auto-create extensions enabled, then VoIP extensions and associated users must first be created in IP Office Manager.

The procedure below covers the minimum required to create a VoIP extension and associated user. Further customization is as per any extension and user.

1.In Manager, receive the system's configuration.

2.To display the list of existing extensions, click Extension in the left-hand panel. Right-click on the right-hand panel and select New.

3.In the Extn tab, set the following:

∙Extension ID

For non-VoIP extension this number is assigned automatically. For a VoIP extension, enter any number so long as it is unique, i.e. not already used by another extension.

∙Base Extension

Enter the extension number to assign to the phone. Again, this must be unique.

4.In the VoIP tab, the required IP Address and/or MAC Address can be set if required for additional phone security. See Phone Security 37 .

5.To add the new extension, click OK.

6.To display the list of existing users, click User in the left-hand panel. Right-click on the right-hand panel and select New.

7.In the User tab set the following:

∙Name

Enter a name for the extension user. The name must be unique. If voicemail is in use, this name will be used as the basis for a new mailbox with matching name.

∙Extension

This must match the extension number set in the VoIP extension created above.

8.Click on the Button Programming tab.

9.For the first three buttons, you must click on the Action field and select Appearance Appearance.

10.Click on OK.

11.When all new IP phone extension being added have been setup, send the new configuration back to the system. Set the Reboot Mode to Immediate or When Free as Extension changes cannot be merged.

H323 IP Telephone Installation	Page 33
IP Office Release 6	15-601046 Issue 16a (15 March 2010)