Flash
You can use the
POINTS TO CHECK
( 12)
Select a recording program other than [ FIREWORKS].
Options | Default value |
(auto)
The flash fires automatically according to the brightness of the subject.
The assist lamp lights up to reduce the
(flash on)
The flash always fires.
(flash off)
The flash does not fire.
1If the joystick guide does not appear on screen, press ( ) to display it.
2Push the joystick ( ) toward .
If does not appear on the joystick guide, repeatedly push the joystick () toward [NEXT] to display the joystick guide in the illustration above.
•Repeatedly push the joystick ( ) toward to cycle between the flash modes.
•The display disappears after 4 seconds.
Other Functions 63
3Press PHOTO , first halfway to activate the autofocus and then fully to record the still image.
TO USE THE OPTIONAL
You can attach the optional
the advanced accessory shoe, will appear on the screen.
NOTES
The practical range of the |
| ||
approx. 1 to 2 m (3.3 to 6.6 ft.). The practical |
| ||
range with the |
| ||
attached is approx. 1 to 4 m (3.3 to 13.1 ft.). In |
| ||
| |||
any case, the actual range will depend on the | Advanced | ||
recording conditions. | |||
| |||
The range of the flash decreases in |
| ||
continuous shooting mode. |
| ||
For the |
| ||
effective, the subject needs to look at the assist | Functions | ||
lamp. The degree of reduction depends on the | |||
| |||
distance and on each individual. |
| ||
The flash will not fire in the following cases: |
| ||
- When you manually adjust the exposure in |
| ||
(auto) or |
|
- During auto exposure bracketing.
The flash mode cannot be selected when the exposure is locked.
We do not recommend using the flash when the optional
attached; its shadow can appear on the screen. About the
PHOTO halfway, if the subject is too dark the assist lamp may light up briefly in order to enable the camcorder to focus more accurately
LAMP] to [ OFF] so the assist lamp does not light up.
-The camcorder may not be able to focus even if the