84Connecting to a Printer
FUNC.
FUNC. TRANSFER ORDER
Press ( )
: The image selection screen appears.
FROM THE IMAGE SELECTION SCREEN
1Select ( ) the still image you want to mark with a transfer order.
2Press ( ) to set the transfer order.
A checkmark appears in the box next to the transfer order symbol . Press ( ) again to cancel the transfer order.
3Repeat steps
Erasing All Transfer Orders
( 12)
FUNC.
FUNC. MENU
CARD OPERATIONS
TRANS.ORD.ALL ERASE
FUNC. YES
Connecting to a Printer
Printing Still Images – Direct Print
The camcorder can be connected to any PictBridge compatible printer. You can mark the still images you want to print and set the desired number of copies as a print order
( 87).
Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA printers marked with the PictBridge logo.
Connecting the Camcorder to the Printer
( 12)
1Insert the memory card containing the still images you want to print.
2Turn on the printer.
3Connect the camcorder to the printer using the USB connection
–connection type 1 ( 80)– shown in the previous section PC Connection Diagrams.
• appears and changes to .
•The (print/share) button lights up and the current print settings will be displayed for approx. 6 seconds.
IMPORTANT
If continues to flash (for more than 1 minute) or if does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection.
NOTES
will appear for images that cannot be printed.