Getting Started |
|
| 4 Attach the battery pack to the | ||||
|
|
|
| camcorder. |
|
| |
Charging the Battery Pack |
|
| Press the battery pack softly into the | ||||
|
| battery attachment unit and slide it up | |||||
The camcorder can be powered with a |
| until it clicks in place. |
| ||||
| 5 Charging will start when the | ||||||
battery pack or directly using the compact | |||||||
camcorder is turned off. | |||||||
power adapter. Charge the battery pack |
| ||||||
| • The CHARGE indicator starts | ||||||
before use. |
|
|
| ||||
|
|
| flashing. The indicator will go out when | ||||
|
|
|
| ||||
|
|
|
| the battery pack is fully charged. | |||
|
|
|
| • You can also use the compact power | |||
|
|
|
| adapter without attaching a battery | |||
|
|
|
| pack. |
|
| |
|
|
|
| • When the compact power adapter is | |||
|
|
|
| connected, even if a battery is | |||
| CHARGE |
|
| attached its power will not be | |||
| indicator |
|
| consumed. |
|
| |
|
|
|
| ONCE THE | PACK IS FULLY CHARGED | ||
|
|
|
| 1 Disconnect the compact power | |||
|
|
|
| adapter from the camcorder. | |||
|
|
|
| BATTERY | |||
1 Connect the power cord to the |
| 2 Unplug the power cord from the | |||||
| power outlet and the compact | ||||||
compact power adapter. |
| ||||||
P |
|
| |||||
2 Plug the power cord into a power |
| power adapter. |
| ||||
| T REMOVE THE BATTERY PACK | ||||||
|
|
|
| ||||
outlet. |
| OBATTERY RELEASE | in the | ||||
3 Connect the compact power adapter | Slide |
| |||||
to the camcorder’s | IN terminal. |
| direction of the arrow and hold it | ||||
| Remove the battery |
| pressed down. Slide the battery pack | ||||
| DC |
| down and then pull it out. | ||||
| terminal cover |
|
| ||||
| before attaching the |
|
|
|
| ||
| battery pack |
|
| IMPORTANT |
|
| |
|
|
|
|
|
|
BATTERY RELEASE switch
You may hear some noise from the compact power adapter during use. This is not a malfunction.
We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of
0 °C to 40 °C (32 °F to 104 °F), the charging will not start.
Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder.
To prevent equipment breakdowns and excessive heating, do not connect the supplied