Canon HV40 Locating Scenes by Recording Date, FUNC, NOTES, NOTES, 1 Press FUNC, POINTS TO CHECK, Locating the End of the Last Scene, 3Select () [EXECUTE] and press ( )

34Playback

Locating the End of the Last Scene

After playing back a tape, use this function to locate the end of the last scene recorded in order to continue recording from that point.

POINTS TO CHECK

Stop the playback before using this function.

FUNC.

( 25)

1 Press FUNC. .

2Select () [ END SEARCH] and press ( ).

3Select ( ) [EXECUTE] and press ( ).

•“END SEARCH” appears.

•The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the tape.

•To cancel the search press .

NOTES

End search cannot be used once you remove the cassette.

If there are blank sections between recordings or sections recorded in different standards (HDV/DV) on the same tape, the end search may not work correctly.

Locating Scenes by Recording Date

You can locate the change of the date/ time zone with the date search function.

Press or on the wireless controller.

•Press more than once to search for further date changes (up to 10 times).

•To cancel the search press STOP .

NOTES

Recordings shorter than 1 minute per date/ time zone cannot be located with this function.

Date search may not function if the date, time or data code are not correctly displayed.

If there are sections recorded in different standards (HDV/DV) on the same tape, the date search may not work correctly.