Trouble? 93
List of Messages
Some error messages will disappear after being displayed for about 4 seconds.
Message | Explanation/Solution |
|
| |
|
| |||
|
|
|
| |
SET THE TIME ZONE, | You have not set the time zone, date and time. This message | |||
DATE AND TIME | appears each time you turn the power on until you set the time |
|
| |
| zone, date and time. |
|
| |
CHANGE THE BATTERY | Battery pack is exhausted. Replace or charge the battery pack. | |||
PACK |
|
|
| |
THE TAPE IS SET FOR | Cassette is protected. Replace the cassette or change the position | |||
ERASURE PREVENTION | of the protect switch. |
|
| |
REMOVE THE CASSETTE | Camcorder stopped operating to protect the tape. Remove the | |||
| cassette and reinsert it. |
|
| |
CHECK THE HDV/DV | The DV cable is not correctly connected to the HDV/DV terminal, or | |||
INPUT | the connected digital device is turned off. |
|
| |
(Appears only if a DV cable is | The video input signal is in a different television system (PAL or | – | ||
connected) | ||||
SECAM). |
|
| ||
|
|
| ||
CONDENSATION HAS | Condensation has been detected in the camcorder. | |||
BEEN DETECTED |
|
|
| |
CONDENSATION HAS | Condensation has been detected in the camcorder. Remove the | |||
BEEN DETECTED | cassette. |
|
| |
REMOVE THE CASSETTE |
|
|
| |
TAPE END | Tape reached the end. Rewind the tape or replace the cassette. | – | ||
INCORRECT TAPE | You attempted to play back a tape recorded in a different television | – | ||
SPECIFICATION | system (PAL or SECAM) or in a recording standard not supported |
|
| |
| by this camcorder. |
|
| |
INPUT SIGNAL NOT | The digital device connected with the DV cable is incompatible with | – | ||
SUPPORTED | the camcorder. |
|
| |
PLAYBACK STD LO KED | urrent camcorder settings do not match the HDV/DV standard of | |||
INCOMPATIBLE VIDEO | the video input signal. Change the [PLAYBACK STD] setting to |
|
| |
INPUT | match the video input signal. |
|
| |
PLAYBACK STD LOCKED | Current camcorder settings do not match the HDV/DV standard of | |||
PLAYBACK IS | the recording you tried to play back. Change the [PLAYBACK STD] |
|
| |
RESTRICTED | to match the recording standard of the tape. |
|
| |
HEADS DIRTY, USE | Video heads are dirty. Clean the video heads. | |||
CLEANING CASSETTE |
|
|
| |
NO CARD | There is no memory card in the camcorder. | |||
NO IMAGES | No images are recorded on the memory card. | – | ||
CARD ERROR | A memory card error occurred. The camcorder cannot record or | – | ||
| display the image. |
|
| |
| The error may be temporary. If the message disappears after 4 |
|
| |
| seconds and “ ” flashes red, turn the camcorder off, remove the |
|
| |
| card and reinsert the card. If “ ” changes to green or yellow, you |
|
| |
| can continue recording/playback. |
|
| |
CARD FULL | Memory card is full. Erase some images to free some space or | |||
| replace the memory card. |
|
|
Information Additional