Trouble?

91

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

During playback there is video

Video heads are dirty. Clean the video heads.

 

99

 

noise.

 

 

 

 

 

 

 

 

 

 

 

Pressing the playback button

Load a cassette.

 

 

 

 

 

 

 

22

 

does not start playback.

Set the camcorder to

 

 

 

 

.

 

 

31

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tape reached the end (“

 

END” appears on the screen).

 

31

 

 

Rewind the tape.

 

 

 

 

 

 

 

 

 

 

No sound from the built-in

Open the LCD panel.

 

 

 

 

 

 

 

 

speaker.

Speaker volume is turned off. Adjust the volume with the joystick

 

32

 

 

 

 

 

and joystick guide in

 

 

 

 

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When playing back a tape

Video heads are dirty. Clean the video heads.

 

99

 

recorded in HDV standard the

 

 

 

 

 

 

 

 

 

 

 

playback is jerky or the sound

 

 

 

 

 

 

 

 

 

 

 

stutters on and off.

 

 

 

 

 

 

 

 

 

 

 

Image will not appear on the

Set [AV DV] to [OFF].

 

 

 

 

 

 

 

42

 

TV screen.

Set [AV/PHONES] to [

 

 

AV].

 

32

 

 

 

 

 

 

 

Check again that the camcorder is properly connected to the TV.

 

71

 

 

When connecting the camcorder to an HDTV using the

 

44

 

 

CTC-100/S Component Cable, make sure to select the correct

 

 

 

 

 

specification for the

.OUT] setting.

 

 

 

 

There is no sound from the TV.

When connecting the camcorder to an HDTV using the

 

71

 

 

CTC-100/S Component Cable, make sure to connect also the

 

 

 

 

 

audio connections[COMPusing the white and red plugs of the

 

 

 

 

 

STV-250N Stereo Video Cable.

 

 

 

 

Text displays do not appear on

If you connected the camcorder to the TV using the video

 

44

 

the TV.

component connection, set [DV OUTPUT] to [HDV/DV].

 

 

 

 

Tape is running, but image will

The video input on the TV is not set to the video terminal to

 

74

 

not appear on the TV screen.

which you connected the camcorder. Select the correct video

 

 

 

 

 

input.

 

 

 

 

 

 

 

 

 

 

 

Video heads are dirty. Clean the video heads.

 

99

 

 

You attempted to play back or dub a copyright protected tape.

 

78

 

 

Stop playback/dubbing.

 

 

 

 

 

 

 

 

 

 

The camcorder is connected

Video input from the HDV/DV terminal cannot be output through

 

74

 

using the HDMI cable, but there

the HDMI OUT terminal.

 

 

 

 

 

 

 

 

 

 

is no picture or sound from the

 

 

 

 

 

 

 

 

 

 

 

This may happen when playing back a tape that contains mixed

 

 

HDTV.

 

 

recordings in different standards (HDV/DV). Disconnect the

 

 

 

 

 

 

 

 

 

 

HDMI cable and then restore the connection or turn the

 

 

 

 

 

camcorder off and then on again.

 

 

 

Information Additional