32Playback 
During the playback of HDV recordings: Even though their icons will appear on screen, the following special playback modes are not available.
-Reverse slow playback
-Frame reverse
-Double speed playback (forward or reverse)
To protect the tape and video heads, the camcorder will enter the stop mode ( 
) if left in
playback pause ( ) mode for 4 minutes 30 seconds. To resume the playback press /
.
Adjusting the Volume: Speaker and Headphones
The camcorder plays the sound with the
Adjusting the Volume of the Speaker
(
12)
1If the joystick guide does not appear on screen, press (
) to display it.
2Push the joystick (
) toward + or - to adjust the volume.
•To turn off the volume completely,
keep pressing (
) until the volume icon changes to 
.
•You can press ( 
) again to hide the joystick guide during playback.
Using Headphones
The headphones are connected to the AV/
terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of the terminal from AV output to 
(headphones) output and make sure the 
icon appears on the screen.
(
12)
Default value
PLAY/OUT SETUP2
AV/PHONES 
AV
1 Press FUNC. .
2Select (
) the 
icon and press (
) to open the setup menus.
) [
PLAY/OUT SETUP2]* and press (
).
) [AV/PHONES] and press (
).
) [
PHONES] and press (
).