BEFORE OPERATION
D.ZOOM BUTTON
Used to select the DIGITAL ZOOM +/– mode and resize the image. (p.30)
OK BUTTON
Used to execute the selected item, or expand/ compress the image in the DIGITAL ZOOM +/- mode. (p.30)
MENU BUTTON
Used to select the MENU Operation.
Used to operate the P- TIMER function. (p.23)
ZOOM BUTTON
Used to adjust zoom. (p.22)
COLOR MANAGEMENT
BUTTON
Used to operate the Color management function.
NO SHOW BUTTON
Used to turn the picture into a black image. (p.23)
FREEZE BUTTON
Used to freeze the picture. (p.23)
POINT (VOLUME
BUTTONS
Used to select an item or adjust a value in
The POINT LEFT/RIGHT buttons are also used as VOLUME +/- buttons. (p.23)
INPUT 1 BUTTON
Used to select an input source (INPUT 1). (p.24)
INPUT 2 BUTTON
Used to select an input source (INPUT 2).
(pp.25, 31)
INPUT 3 BUTTON
Used to select an input source (INPUT 3). (p.31)
NETWORK BUTTON
Used to select a network input (optional).
Operating Range
Point the remote control unit toward the projector (a Receiver Window) when pressing any button. Maximum operating range for the remote control unit is about 5 m (16.4’) and 60° in front and rear of the projector.
60°
5 m 
(16.4’)
5 m 
(16.4’)
60°
REMOTE CONTROL BATTERIES INSTALLATION
1 | Open the battery |
compartment lid. |
Press the lid downward and slide it.
2 | Install new batteries into | 3 | Replace the compartment lid. |
the compartment. |
|
Two AA size batteries
For correct polarity (+ and
To insure safe operation, please observe following precautions:
●Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with an used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control unit to moisture, or heat.
●Do not drop the remote control unit.
●If a battery has leaked on the remote control unit, carefully wipe the case clean and install new batteries.
●Danger of explosion if battery is incorrectly replaced.
●Dispose of used batteries according to batteries manufacturers instructions and local rules.
16
