Error Number: 300 Is Displayed
Cause | Action | |
The machine is not ready. | Confirm that the Power lamp is lit green. | |
|
| If the Power lamp is off, turn the machine on. |
|
| While the Power lamp is flashing green, the machine is initializing. Wait until the |
|
| Power lamp stops flashing and remains lit green. |
|
| If the Alarm lamp is lit orange, an error may have occurred on the machine. For |
|
| details on how to resolve the error, see “An Error Code Is Displayed on the LED” |
|
| on page 44. |
Machine is not connected properly. | Make sure that the USB cable is securely plugged into the machine and the | |
|
| computer. |
|
| z If you are using a relay device such as a USB hub, disconnect it, connect the |
|
| machine directly to the computer, and try printing again. If printing starts |
|
| normally, there is a problem with the relay device. |
|
| Consult the reseller of the relay device for details. |
|
| z There could also be a problem with the USB cable. Replace the USB cable |
|
| and try printing again. |
Your machine is not selected in Printer | Select your machine’s name in Printer on the Print dialog box. | |
on the Print dialog box. | If your machine’s name does not appear in Printer, follow the procedure below | |
|
| to check that the driver for your machine is installed to your computer. |
|
| (1)Select Print & Fax Preferences in Printer. |
|
| In Mac OS X v.10.3.9, select Edit Printer List in Printer. |
|
| (2)Check that your machine’s name is displayed in the list of printers and that |
|
| the check box is selected. |
|
| (3)If your machine’s name is not displayed, click Add(+) to add the machine. |
|
| If you cannot add the machine, follow the procedure described in your setup |
|
| sheet to reinstall the MP Drivers. |
|
|
|
|
|
|
Error Number: 1700/1710 Is Displayed
Cause | Action | |
The ink absorber is almost full. | See “E, 8” (Ink absorber is almost full.) in “An Error Code Is Displayed on the | |
|
| LED” on page 44. |
|
|
|
|
|
|
Ink Info Number: 1688 Is Displayed
Cause | Action | |
Ink has run out. | See “E, 1, 6” (Ink has run out.) in “An Error Code Is Displayed on the LED” on | |
|
| page 44. |
|
|
|
|
|
|
Ink Info Number: 1686 Is Displayed
Cause | Action |
Ink level cannot be detected. | See “E, 1, 3” (Ink level cannot be detected.) in “An Error Code Is Displayed on |
| the LED” on page 44. |
Troubleshooting 57