Cause | Action |
Too much paper loaded. | Make sure that the paper stack does not exceed the paper support load limit. |
| However, proper feeding of paper may not be possible at this maximum capacity |
| depending on the type of paper or environmental conditions (either very high or |
| low temperature and humidity). |
| In such cases, reduce the sheets of paper you load at a time to around half of |
| the paper support load limit. |
| For details on loading paper, see “Loading Paper” on page 15. |
Foreign object in the Rear Tray. | Make sure that there are no foreign objects in the Rear Tray. |
Envelopes not prepared nor loaded | z When printing on envelopes, see “Loading Envelopes” on page 17, and |
properly. | prepare the envelopes before printing. |
| Once you have prepared the envelopes, load them in the machine in portrait |
| orientation. If the envelopes are placed in landscape orientation, they will not |
| feed properly. |
| z Set the Paper Thickness Lever to the right. |
54Troubleshooting