Handling the Original Document
This section describes how to load the original document on the Platen Glass.
Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these requirements:
Document | z Paper documents |
type | z Photographs |
| z Books |
Size (W x L) | Max. 8.5 x 11.7 inches / 216 x 297 mm |
Thickness | Max. 0.8 inches / 20 mm |
Loading Original Documents
Load originals to copy or scan on the Platen Glass.
Note
Make sure any glue, ink, correction fluid, or the like on the original document is completely dry before loading it on the Platen Glass.
1 Load the original document on the Platen Glass.
(1)Lift the Document Cover.
(2)Load the original on the Platen Glass. Place the original face down on the Platen Glass.
Align the upper left corner of your original with the alignment mark on the upper left corner of the Platen Glass.
(1) 
(2)
4Before Printing