LCD Cannot Be Seen At All or Is Hard to See
Cause | Action |
The display on the LCD is hard to see. | If the contrast of the LCD is too strong or too weak, adjust it in the Adjust |
| contrast menu in the Maintenance/settings. Refer to “Changing the Machine |
| Settings” in the User’s Guide |
Cannot see the display on the LCD. | z If the POWER lamps is off |
| The machine is not powered on. Connect the power cord and press the ON/ |
| OFF button. The machine will power on and the LCD will display a message. |
| z If the POWER lamps is lit |
| The LCD may be in the |
| button other than the ON/OFF button. |
An Unintended Language Is Displayed on the LCD
Cause | Action |
The language you want to be displayed | Select the language you want to be displayed according to the following |
is not selected. | procedure. |
| (1)Press the COPY button, wait for 5 seconds, and then press the MENU |
| button. |
| (2)Press the ] button once, then press the OK button. |
| (3)Press the ] button once, then press the OK button. |
| (4)Press the } button three times, then press the OK button. |
| If the Bluetooth Unit is connected, press the } button four times, then press |
| the OK button. |
| (5)Use the { or } button to select the language you want to be displayed, then |
| press the OK button. |
Troubleshooting 59