Printing Does Not Start
Cause | Action |
The machine is not powered on./The | Make sure that the power cord is securely plugged into the Power Connector of |
power cord is not connected. | the machine. |
| Plug the power cord all the way in, since it may be difficult to plug. |
Ink tank is empty. | Open the Scanning Unit (Printer Cover) and check the ink lamps. |
| If an ink lamp is flashing red at about |
| Replace the ink tank, and close the Scanning Unit (Printer Cover). See |
| “Replacing an Ink Tank” on page 34. |
| If you want to continue printing, confirm the message displayed on the LCD and |
| take the appropriate action. See “Error Message Is Displayed on the LCD” on |
| page 57. |
Note
If multiple ink lamps are flashing, check how fast they are flashing.
Fast flashing (at about
Ink tank not installed in proper position. | Open the Scanning Unit (Printer Cover) and check the ink lamps. |
| ||||
| If there is still sufficient ink but its ink lamp is flashing red, an ink tank may be | |||||
| installed in a wrong position. |
|
|
|
| |
| Confirm that the ink tanks are installed in the appropriate positions. See | |||||
| “Replacing an Ink Tank” on page 34. |
|
|
|
| |
Ink tank is not installed securely. / Part | Open the Scanning Unit (Printer Cover) and check the ink lamps. |
| ||||
of the orange tape is remaining. |
| mark on the ink tank until it clicks into | ||||
If the ink lamp is not lit, press the |
| |||||
| place. The ink lamp lights up red | when the ink tank is fully inserted. | ||||
| Make sure all of the orange tape is peeled off the ink tank and the air hole is | |||||
| completely exposed, as illustrated in (A). If any orange parts are left as in (B), | |||||
| remove all of the orange parts. |
|
|
|
| |
|
|
| (A) | (B) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(A) Correct
(B) Incorrect
Part of the orange tape is remaining. Peel off the tape completely along the perforation.
Troubleshooting 67