(1) Make sure that the PictBridge compliant device is turned off.
(2) Connect the PictBridge compliant device to the machine using a USB cable recommended by the manufacturer of the device.
The device turns on automatically.
If your device does not turn on automatically, turn it on manually.
(3) Set up the PictBridge compliant device for |
| |
direct printing. |
| |
will appear on the LCD of the device when | (2) | |
the machine is correctly connected. | ||
|
Note
If
does not appear, see “Cannot Print Properly from a Digital Camera” on page 74.
Printing Photographs Directly from a PictBridge Compliant Device
When operating the device, be sure to follow the instructions given in the instruction manual of your PictBridge compliant device. This section describes the page size, media type, layout, image optimization modes, and date printing mode that can be set on a PictBridge compliant device connected to the machine.
zConfirming or Changing PictBridge Print Settings from Your Camera
To change the page size or media type, operate the device to select the PictBridge print setup mode and confirm or change the settings.
About the Settings Explained Below
Some setting items explained below may not be available on some devices. In this case, the Default setting explained below is applied for the setting item.
*In the following description, names of settings items are given according to those used in
zPrintable Image Data Format
This machine prints images taken with a DCF® (Design rule for Camera File
* Exif2.21 compliant
zPaper Size and Paper Type Settings
If these settings are set to Default (the setting to follow that of the machine) on the PictBridge compliant device, the Page size and the Media type settings specified in the Memory card mode of the machine are applied.
Printing Photographs Directly from a Compliant Device | 31 |