Turning the Machine On and Off

Turn on the machine before printing.

„Turning on the Machine

Before turning on the machine, confirm the following.

zThe FINE Cartridges are installed properly.

If you are using the machine connected to a computer, confirm also the following.

zThe machine is connected to your computer (or a compatible device).

zThe MP Drivers are installed.

Note

If preparatory operations above are not complete, follow your setup sheet to complete them.

1 Press the ON/OFF button to turn on the machine.

The Power lamp flashes and then remains lit green.

Important

If the Alarm lamp lights up or flashes orange and an error message is displayed on the LCD, see “An Error Message Is Displayed on the LCD” on page 76.

2 If you are using the machine connected to a computer, turn on your computer.

„Turning off the Machine

1 To turn off the machine, press the ON/OFF button.

When the Power lamp stops flashing, the machine is turned off.

Important

About the Power Plug

When removing the power plug after turing off the machine, be sure to confirm that the Power lamp is not lit. If the power plug is removed from the wall outlet with the Power lamp still lit or flashing green, the machine may become unable to print.

See “Keeping the Best Printing Results” on page 70.

Note

The power cannot be turned off while the machine is sending or receiving a fax, or when there are unsent faxes stored in the machine’s memory.

6Before Using the Machine