„Printing Does Not Start/Printing Is Blurred/Colors Are Wrong/Straight Lines Are Misaligned

Cause

 

Action

FINE Cartridge is not installed properly.

Remove the FINE Cartridge, then reinstall it.

/ There is no ink left.

Small dusts may be stuck between the contact points. In this case, the print

 

result may be improved by reinstalling the FINE Cartridge.

 

 

 

 

 

 

 

 

Also, check that the protective tape (A) is removed.

 

(A)

 

 

Print Head nozzles are clogged.

See “When Printing Becomes Faint or Colors Are Incorrect” on page 57 and

 

perform any necessary maintenance operation.

The media is loaded with the wrong

Many types of paper are made to be printed on only a particular side of the

side facing upwards.

paper.

 

Printing on the wrong side may cause unclear prints or prints with reduced

 

quality.

 

For detailed information on the printable side, refer to the instruction manuals

 

supplied with the paper.

Print Head is misaligned.

If you did not align the Print Head after installation, straight lines may be printed

 

misaligned. Make sure to align the Print Head after you install it.

 

See “Aligning the Print Head” on page 62 to perform Print Head Alignment using

 

the Operation Panel.

„White Streaks

Cause

Action

Print Head nozzles are clogged.

See “When Printing Becomes Faint or Colors Are Incorrect” on page 57 and

 

perform any necessary maintenance operation.

Troubleshooting 83