„User’s Data List

The User’s data list enables you to confirm the current settings of the machine as well as the registered sender information. See “Registering Sender Information” on page 32.

zPrinting the User’s Data List

1 Press the FAX button, then press the Menu button.

2 Press the [ or ] button to select PRNT REPORT/LIST, then press the OK button. 3 Press the [ or ] button to select USER’S DATA LIST, then press the OK button.

The User’s data list is printed.

„Other ListszTX Report

The machine can print a TX (transmission) report after sending a document, confirming whether the transmission was completed successfully. You can set the machine to print every time it sends a document, or only when an error occurs. Alternatively, you can disable printing of the report.

Note

zFor details on the TX report setting, refer to “TX REPORT” in “FAX SETTINGS” of the User’s Guide on-screen manual.

zThe default setting is PRINT ERROR ONLY.

zRX Report

The machine can print an RX (reception) report after receiving a document, confirming whether the reception was completed successfully. You can set the machine to print every time it receives a document, or only when an error occurs. Alternatively, you can disable printing of the report.

Note

zFor details on the RX report setting, refer to “RX REPORT” in “FAX SETTINGS” of the User’s Guide on-screen manual.

zThe default setting is DO NOT PRINT.

56Faxing