3 Plug the other ends of the Stereo/Video Cable into the VIDEO IN and AUDIO IN jacks on the TV.
To the Video IN
Jack Plug (Yellow)
To the Audio IN Jack
Plug (Left) (White)
To the Audio IN Jack
Plug (Right) (Red)
4 Turn on the TV and switch it to Video mode.
5 Power on the camera.
zThe video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 34). The default setting varies between regions.
-NTSC: Japan, U.S.A., Canada, Taiwan and others
-PAL: Europe, Asia (excluding Taiwan), Oceania and others
-If the video system is set incorrectly, the camera output may not display properly.
zWhen the camera is set to shooting mode, you can take pictures while displaying images on the television.
Playback/Erasing
131