zInformation for images shot on other cameras may not display correctly.
zOverexposure Warning
In the following cases, overexposed portions of the image blink.
-When reviewing an image right after shooting in the LCD monitor (information view) or in the viewfinder (information view)
-When using the detailed display mode of the Playback mode
Power Saving Function
This camera is equipped with a power saving function. The power will shut off in the following circumstances. Turn the camera on again to restore power.
Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor or viewfinder automatically turns off
1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off] (Press any button other than the OFF button or change the camera orientation to turn the LCD monitor or viewfinder back on).
Playback Mode Powers down approximately 5 minutes after the Connected to a last control is accessed on the camera.
Printer
* Default setting. This time can be changed.
zPlease note that when the power is turned off with the power saving function, small amounts of power are still consumed.
zThe power saving function will not activate during a slide show or while the camera is connected to a computer.
zThe power saving function settings can be changed (p. 33).
22