Checking for Focus Right After Shooting
Shooting Mode
You can check whether the image is in focus right after it is recorded.
1 Shoot.
zThe recorded image displays for about 2 seconds (or the interval set with the [Review] feature (p. 29)).
2 Press the DISP. button (or the SET button) while the image is displayed.
zThe number of times the DISP. button is pressed depends upon the display settings for the LCD monitor (p. 15).
Press the DISP. button repeatedly until the screen at the right appears.
zDisplays as follows.
-Camera is focused: AF frame for the image that has been shot displays in white, and an orange frame appears within the focused frame.
Recorded image
Orange frame contents
-Camera is not focused: An orange frame displays at the center of the image that has been shot.
-Contents within the orange frame can be confirmed at the bottom right. Zoom magnification can be changed using the zoom lever (p. 104).
-You can change the display position within the orange frame using the MENU button or the S, T, W or X button.
To Cancel Checking the Focus:
Press the shutter button halfway.
48