Saving Original Images

Not only can you save images with altered colors when shooting still images with the Color Accent or Color Swap modes, but you can also choose to save the original images (before the color change).

1 (Rec.) Menu [Save Original] [On]/[Off]*.

See Menus and Settings (p. 27).

* Default setting.

zIf [On] is selected, the images will be saved as consecutive file numbers. The original image will be the lower file number, while

the image shot in Color Accent or Color Swap mode will be the higher file number.

If [Save Original] is set to [On]

zOnly the image set with Color Accent or Color Swap is displayed on the LCD monitor (or viewfinder) during shooting.

zThe image displayed on the LCD monitor (or viewfinder) immediately after shooting is the one shot with Color Accent or Color Swap. As erasing the image at this time will cause the original image to be erased at the same time, be careful.

zAs two images are saved with each shot, the number of recordable shots displayed on the LCD monitor (or viewfinder) will be half the number that is displayed when [Save Original] is set to [Off].

You cannot save the originals of still images taken while shooting a movie in Color Accent or Color Swap mode.

62