1 Use the W or X button to select (Color

Swap) ISO button.

zThe camera will switch to color input mode, and the display will alternate between the original image and the color swap image (using the previously set color).

2 Aim the camera so that the color you wish to

change appears at the center of the LCD monitor (or viewfinder) and press the W button.

zOnly one color can be specified.

zYou can use the S or T button to specify the range of the colors that are retained.

-5: Only takes the color that you want to change.

+5: Also takes colors close to the one that you want to change.

3 Aim the camera so that the desired color appears at the center of the LCD monitor (or viewfinder) and press the X button.

zOnly one color can be specified.

4 Complete the setting with the ISO button, and shoot.

zWhen you press the Movie button, you can shoot movies in Color Swap mode.

zThe default setting for Color Swap changes green into white. zYou may not obtain the expected results after color input

mode if you use the flash.

zThe colors specified in the Color Swap mode are retained even if the camera’s power is turned off.

Dial Mode the Using

61