Canon SE-IE-1359-V2 manual Confirming PullPrint Service Provider Settings, 2-17

Confirming PullPrint Service Provider Settings

To use PullPrint Service Provider after installing it in a MEAP-compatible Canon device, you must correctly specify PullPrint Service Provider settings.

You can use the Management Console to confirm PullPrint Service Provider settings.

IMPORTANT

Even if PullPrint Service Provider has been started, the settings must be correctly set to use it on your system.

1.

Log in to the Management Console of PullPrint Service Provider.

The Change Settings screen is displayed.

NOTE

For instructions on logging in to the Management Console, see "Specifying Settings from a Web Browser," on p. 3-3.

2.

Confirm that the settings are correct.

NOTE

•For more information on the settings, see "Setting Item List," on p. 3-9.

•If the settings are not correct, they must be changed. For more information on changing the settings, see "PullPrint Service Provider Settings," on p. 3-2.

Confirming PullPrint Service Provider Settings 2-17