Specific Scenes

Using the Wink Self-Timer

Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected.

Choose .

Follow steps 1 – 2 on p. 97 and choose , and then press the lbutton.

Press the qrbuttons or turn the 5 dial to choose , and then press the lbutton.

Compose the shot and press the shutter button halfway.

Make sure a green frame is displayed around the face of the person who will wink.

Press the shutter button all the way down.

The camera now enters shooting standby

mode, and [Wink to take picture] is displayed. The lamp blinks and the self-timer sound is

played.

Face the camera and wink.

The camera will shoot about two seconds after detecting a wink by the person whose

face is inside the frame.

To cancel shooting after you have triggered the self-timer, press the nbutton.

• If the wink is not detected, wink again slowly and deliberately.

• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.

•Closing and opening both eyes at once will also be detected as a wink.

•If winking is not detected, the camera will shoot about 15 seconds later.

•To change the number of shots, press the op buttons after choosing in step 1. [Blink Detection] (p. 90) is only available for the final shot.

•If no one is in the shooting area when the shutter button is pressed all the way down, the camera will shoot after a person enters the shooting area and winks.

102