Protecting Images

• Protected images cannot be erased by the camera. To erase them, cancel protection settings first.

Choosing Images Individually

Choose [Select].

Following step 2 on p. 163, choose [Select] and press the mbutton.

Choose an image.

Press the qrbuttons or turn the 5 dial to choose an image, and then press the m button. is displayed.

To cancel protection, press the mbutton again. is no longer displayed.

Repeat this process to specify other images.

Protect the image.

Press the nbutton. A confirmation message is displayed.

Press the qrbuttons or turn the 5 dial to

choose [OK], and then press the mbutton.

•Images will not be protected if you switch to Shooting mode or turn

the camera off before finishing the setup process in step 3.

164