Viewing

• Switching display modes by pressing the lbutton is also possible immediately after you shoot, while your shot is displayed. However, simple information display is not available. To change the initial display mode, press the nbutton and choose [Review Info] on the 4tab (p. 92).

•If you do not want names to display on images shot using Face ID, press the nbutton, choose [Face ID Info] on the 1tab, and then set [Name Display] to [Off].

Overexposure Warning (for Image Highlights)

Washed-out highlights in the image flash on the screen in detailed information display (p. 152).

Histogram

High

Low

Dark Bright

The graph in detailed information display (p. 232) is a histogram showing the distribution of brightness in the image. The horizontal axis represents the degree of brightness, and the vertical axis, how much of the image is at each level of brightness. Viewing the histogram is a way to check exposure.

GPS Information Display SX260 HS

To view still image and movie location information (latitude, longitude, and elevation

recorded when [GPS] was set to [On] (p. 51)) and the shooting date and time, press the o button in detailed information display.

Latitude, longitude, elevation, and UTC are listed from top to bottom.

Press the obutton again to return to detailed information display.

•[---] shown instead of numerical values indicates that the information

was not received from GPS satellites, or that accurate positioning was not possible.

• UTC: Coordinated Universal Time, essentially the same as Greenwich Mean Time

153