Initial Preparations

Charge the battery.

 

For CB-2LY:Flip out the plug (

) and plug

 

the charger into a power outlet (

).

CB-2LY

For CB-2LYE:Plug the power cord into the

charger, then plug the other end into a power

 

outlet.

 

 

The charging lamp turns orange and

 

charging begins.

 

 

When the charging is finished, the lamp turns

CB-2LYE

green.

 

Remove the battery.

After unplugging the battery charger, remove the battery by pushing it in ( ) and up ( ).

•To protect the battery and keep it in optimal condition, do not charge

it continuously for more than 24 hours.

•For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product.

• For details on charging time and the number of shots and recording time possible with a fully charged battery, see “Specifications” (p. 34).

Inserting the Battery and Memory Card

Insert the included battery and a memory card (sold separately).

Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (p. 189).

Check the card’s write-protect tab.

Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position.

15