Specific Shutter Speeds and Aperture Values (M Mode)

• D: Manual

• Calculation of standard exposure is based on the specified metering method (p. 121).

Adjusting the Flash Output

Choose from the three flash levels in Dmode.

Enter Dmode.

Set the mode dial to D.

Configure the setting.

Press the mbutton, choose Xin the menu, and adjust the setting by either pressing the opbuttons or turning the 5 dial (p. 43).

• You can also set the flash level by accessing n(p. 44) and choosing [Flash Output] in [Flash Settings] on the 4 tab.

• You can set the flash level in Mor Bmode by accessing n (p. 44), choosing [Flash Settings] on the 4 tab, and then setting [Flash Mode] to [Manual].

•You can also access the [Flash Settings] n screen as follows.

-When the flash is up, press the rbutton and immediately press the n button.

147