Specific Scenes

Join the subjects in the shooting area and look at the camera.

After the camera detects a new face, the lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will

shoot.

To cancel shooting after you have triggered the self-timer, press the nbutton.

• Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later.

• To change the number of shots, press the op buttons after choosing in step 1. [Blink Detection] (p. 90) is only available for the final shot.

Still Images

High-Speed Continuous Shooting (High-speed Burst HQ)

You can shoot up to 10 shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see “Specifications” (p. 34).

HQ: High Quality

Choose .

Follow steps 1 – 2 on p. 97 and choose .

Shoot.

Hold the shutter button all the way down to

shoot continuously.

Shooting stops when you release the shutter button or reach the maximum number of shots, after which [Busy] is displayed and the shots are shown in the order you took them.

104