Adjusting Basic Camera Functions

• Low-level formatting takes longer than “Formatting Memory Cards” (p. 189), because data is erased from all storage regions of the memory card.

• You can cancel low-level formatting in progress by choosing [Stop]. In this case, all data will be erased, but the memory card can be used normally.

File Numbering

Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers.

Choose [File Numbering], and then choose an option.

Images are numbered

Continuous consecutively (until the 9999th shot is taken/saved) even if you switch

memory cards.

Image numbering is reset to 0001 if

Auto Reset you switch memory cards, or when a new folder is created.

• Regardless of the option selected in this setting, shots may be numbered consecutively after the last number of existing images on newly inserted memory cards. To start saving shots from 0001, use an empty (or formatted (p. 189)) memory card.

•Refer to the ImageBrowser EX User Guide for information on the card folder structure and image formats.

191