Canon SX7 MARKII Setting Various Function, Setting Auto Setup Function, Selecting the Power Management, [Auto setup], [Power management mode]

Setting Various Function

Setting Auto Setup Function

[Auto setup]

DIGITAL PC ANALOG PC

DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO

You can select an item you want to enable in the auto setup function.

T

System settings

T

Auto setup

Select [On] or [Off] for the following items if you want to enable or disable them in the auto setup function, respectively.

Auto focus	Enables/disables the auto focusing.
	Enables/disables the auto keystone
Auto keystone
	correction.
	Enables/disables	the	auto	input
Auto input
	selection.
	Enables/disables	the	auto	screen
Auto screen color
	color correction.

z A confirmation screen appears during the auto setup so that you can check which functions are enabled/disabled (P46, 70).

zYou can manually adjust each item. [Auto focus]: [FOCUS] button (P51) [Auto keystone]: [KEYSTONE] button (P52)

[Auto input]: [INPUT] button (P48, 71)

[Auto screen color]: Menu function (P98)

zIf you select [16:9 D. image shift] for [Screen aspect], you cannot change the setting of each item. The auto setup function will also be disabled.

Selecting the Power Management

[Power management mode]

DIGITAL PC ANALOG PC

DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO

You can turn off the lamp or projector automatically for saving power.

T

System settings

T

Power management mode

Off	Disables	the	power	management
	mode.
	Enters	the	power	management
Standby
	mode. The projector restarts projec-
	tion when a signal is inputted or any
	operation button is pressed.
	Enters the exit mode and turns off
Exit
	the projector automatically.

Press the [OK] button to confirm, and then press the [MENU] button.

z You cannot enable the [Direct Power on] function if you select [Off].

zThe [POWER] indicator flashes red and green when the projector is in the [Standby] power management mode.

MENUS FROM FUNCTIONS UP SETTING

111